Be careful to burn the engine and start the trouble diagnosis

Category:Automobile engine repair - Date:2017-10-23

In the recent period, many owners reflect that their car starts difficult, oil consumption is too high, the climb is weak, or after a few days, the key can not start at all, and the key does not return to the ON position after a fire. For the owners of these situations, Modern Car Lu Jingen, a maintenance service expert, made a diagnosis.

Case - ignition start up to N times

Mr. Peng is a businessman who usually drives on fire. Every time I get on the train, I insert the key, rotate it in place, and start the ignition. Recently, he found that it was more difficult to start the car, and it needed several times to start fire. Sometimes, outside the business, the car is in the garage for a long time, and it needs more time to fight. Even after the success of the start-up, it felt that the power was lower than before, and felt softer on the ramp. After removing the air conditioning and affecting the power factor, he suspected that there was something wrong with the engine and sent it to the car.4S store to repair several times, maintenance personnel have not found anything wrong.

expert diagnosis: the problem lies in the way of key fire. Most people are used to inserting keys to fire immediately. In fact, this is not correct. Even the popular one button start system can not fire immediately, otherwise it will damage the engine.

This is because the engine is still in a cooling state, especially for a car with longer parking time. The operating parameters of the engine are completely different from the thermal state of the previous day. Each sensor needs to be readjusted. If a key is put into the key, the engine's operating parameters are abnormal raw data and will be started. Failure or multiple startup failed. Even if the startup is successful, the fuel consumption will be too high or the engine will overheat. Because of the automatic memory function of the computer, the wrong data will cover the original correct data for a long time, and eventually lead to weak failure of climbing, high oil consumption, serious carbon accumulation, and overheating of the engine. And this kind of fault is difficult to find and judge, even if overhauling the engine can not rule out the fault.

The correct method of fighting fire is: Insert the key to the ACC stop, wait for about 2-3 seconds, let the main power relay contact firmly contact, let the first part of the electrical device electrify; continue to turn the key to ON, stop waiting for 6-10 seconds, let the oil pump relay in, and wait for each sensor adjustment state, turn the key to START After the engine runs continuously, it returns to ON. Under the guidance of the computer, it automatically adjusts an optimum position and optimum parameters, and finally successfully starts the engine. However, for temporary or short time after parking, you can stop without stopping. You just need to observe the yellow signal lights on the dashboard, and then you can start quickly.

The key is broken.

inserting the key of the car, however, was unable to move. Speaking of this, Miss Li, the owner of the car, was depressed. According to her, last Thursday, when she drove to the garage, she inserted the key but was unable to move. Because there was an urgent need to meet an important customer, the car could not be locked, so he had to call the customer to apologize first, and then call for help and make it embarrassing.

Expert diagnosis: this is a reason that the steering wheel can not rotate. It needs to retreat in order to twist the key and turn it in the opposite direction. Therefore, if the key is not rotated, do not force it to twist. It can be easily solved by turning the steering wheel and turning the key at the same time.

There are three major hazards to driving without returning to the steering wheel
There are three dangers to drive
Car safety knowledge and safety belt and headrest must not be careless
Check the tools carefully before you drive to avoid halfway cars
The reason why cars need to be accelerated is carbon dioxide cleaning and throttle
The reason why the car accelerates its weakness is carbon dioxide cleaning and throttle
Two reasons for vehicle jitter check intake system or throttle valve
Five notices of winter cold prevention for automobiles
Winter car maintenance: where should winter automobile maintenance go?
Winter snowy car wash common sense, four points must be circumvent
Winter temperature drops suddenly to prevent cold wave cooling and cause automobile malfunction
In winter, light bulbs need to be switched on
Turbochargers start with idle speed for three minutes after starting
Turbochargers should be idle for three minutes after starting
Improper use of turbocharged driving skills - vulnerable engine
Improper use of turbocharged driving skills can easily damage the engine
Improper use of driving technology for turbocharged vehicle
Five basic principles should be paid attention to in automobile decoration with safety and comfort
Six tips for highways, avoid warning after parking
High speed anchor, careful car trap, garage shop making a mountain out of a molehill
Search
Search

Category

Recommend

Hotspot


Car6s car maintenance technology website Copyright @ 2017-2022